An Introduction to Water Transfer Printing


Water transfer printing is achieved utilizing a PVA or polyvinyl alcohol movie which has outstanding adhesive homes, is nontoxic, odorless, and outstanding emulsifying properties Pintura water transfer, which means it easily melts in water. An printer sample is printed on the level movie using rolling drums similar to printing a magazine and other printing media.
Image result for car hydrographic paint
The saying pattern will look like wood, metal, hide, carbon fibre, or virtually anything your creativity may desire up. The finished film is rolled onto drums and prepared for use. Planning of the item to be produced is a important part of the process to guarantee appropriate adhesion and a sleek finish.

With regards to the product, whether it’s plastic, wood, or material, different measures are taken to obtain it ready for the print process. All things should be positively clear, dirt and oil free, as contaminates will interfere with the adhesion of the print.

Sleek completes are grazed or sanded to provide a technical bond between the thing and the primer paint coats. Pockets are cleaned with special chemical oil removers, flare handled to alter the molecular design of the plastic floor, and dispersed having an adhesion promoter. Material objects are rinsed in unique compounds made to get rid of residue, dry, and are then prepared for priming.

All things at this time get a coat of epoxy primer just like the body of an automobile receives when it’s being prepped for paint. The next thing in the act is treating a contrasting or free bottom shade to provide the object a uniform shade and texture for the print to adhere to. These stage is where the particular making secret begins. The PVA picture with the sample of choice is floated on the surface of water hot to 31 degrees C.

At a prescribed time interval the movie has begun to melt in the water but still keeps enough strength to keep the produced ink in the initial pattern. As of this precise moment an ink activator is carefully sprayed on the surface of the printer which softens it enough to produce it stick to the object being printed.

The item is gradually transferred through the ink-film coating floating on the water and the stress from the water ending in around the item makes the printer onto the colored surface of the object. After the thing is submersed, any outstanding ink will not adhere to the moist area therefore the thing can be eliminated without any concerns or overlapping the print. Extra PVA film is completely rinsed from the item applying heated obvious water till all that remains is the printer itself.

The object is allowed to dry, inspected for faults in the printing, and moved up with an airbrush if needed. The final stage is treating the item with two coats of UV secured urethane clear fur paint just as utilized on new automotive finishes. That ultimate end can be high gloss, minimal gloss, or smooth finish, with respect to the customers desires. All maintain exactly the same longevity and UV protection to provide several years of service to the finish.

Leave a Reply

Your email address will not be published. Required fields are marked *